It is currently Tue Apr 13, 2021 11:55 am

All times are UTC + 1 hour




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: 5.20 Freeze when a project is opened/closed
PostPosted: Fri Oct 11, 2013 9:11 pm 
Offline
Enthusiast
Enthusiast

Joined: Tue Jan 25, 2005 7:01 pm
Posts: 460
Location: Canada
With pb 5.20, whenever I open or close a project, the IDE is not responsive for about 15 seconds.

Windows 8 X64 with PB 5.20 32 bits on a Core I7 2.4ghz


Top
 Profile  
Reply with quote  
 Post subject: Re: 5.20 Freeze when a project is opened/closed
PostPosted: Fri Oct 11, 2013 9:58 pm 
Offline
Always Here
Always Here

Joined: Fri Oct 23, 2009 2:33 am
Posts: 6368
Location: Wales, UK
That very much sounds like your Anti-Virus taking a look.....

_________________
IdeasVacuum
If it sounds simple, you have not grasped the complexity.


Top
 Profile  
Reply with quote  
 Post subject: Re: 5.20 Freeze when a project is opened/closed
PostPosted: Sat Oct 12, 2013 3:20 am 
Offline
Enthusiast
Enthusiast

Joined: Tue Jan 25, 2005 7:01 pm
Posts: 460
Location: Canada
I don't have any :/


Top
 Profile  
Reply with quote  
 Post subject: Re: 5.20 Freeze when a project is opened/closed
PostPosted: Sat Oct 12, 2013 5:30 pm 
Offline
Addict
Addict
User avatar

Joined: Sat Apr 26, 2003 2:15 pm
Posts: 907
Location: Cuernavaca, Mexico
Poshu wrote:
With pb 5.20, whenever I open or close a project, the IDE is not responsive for about 15 seconds.

Windows 8 X64 with PB 5.20 32 bits on a Core I7 2.4ghz


Poshu,
I notice that you are using Win 8

- Go to the control panel
- Start 'Windows Defender'
- Press the Settings Tab
- Highlight the 'Excluded files and locations'
- browse for (and add) the temporary location that PureBasic uses
e.g. mine is: C:\Users\Bob\AppData\Local\Temp


Note the advice at the top of the screen... but I've never had problems

HTH,
--Bob

_________________
- It was too lonely at the top.

Current Machine: Win 10 Pro 64-bit, Dual Xeon E5-2670, 64 gigs ram, Geforce GTX 1660 Ti w/6 gigs ram


Top
 Profile  
Reply with quote  
 Post subject: Re: 5.20 Freeze when a project is opened/closed
PostPosted: Sat Oct 12, 2013 6:55 pm 
Offline
Always Here
Always Here

Joined: Fri Oct 23, 2009 2:33 am
Posts: 6368
Location: Wales, UK
Quote:
That very much sounds like your Anti-Virus taking a look
Quote:
I don't have any
Quote:
Start 'Windows Defender'
:?

_________________
IdeasVacuum
If it sounds simple, you have not grasped the complexity.


Top
 Profile  
Reply with quote  
 Post subject: Re: 5.20 Freeze when a project is opened/closed
PostPosted: Sun Oct 13, 2013 12:22 am 
Offline
Enthusiast
Enthusiast

Joined: Tue Jan 25, 2005 7:01 pm
Posts: 460
Location: Canada
windows defender service was one of the first things I turned off :/
I mostly use my comp with ubuntu and I only start win 8 to compile stuff, so these 15 seconds are not a very big deal anyway.


Top
 Profile  
Reply with quote  
 Post subject: Re: 5.20 Freeze when a project is opened/closed
PostPosted: Tue Dec 24, 2013 1:18 pm 
Offline
Enthusiast
Enthusiast
User avatar

Joined: Mon May 12, 2008 1:25 pm
Posts: 375
Location: The Netherlands
I had the same issue once, yesterday. I'm not sure what caused this, as NOD32 does
not interfere with PureBasic (I even disable it while I'm programming).

In my case, PB was hanging for more than 15 seconds on Windows 7 Home Premium x64.

While this was happening, I checked task manager to see how much memory and cpu was
being used by PureBasic, but nothing out of the ordinary there. CPU at 0% and memory
didn't increase.

_________________
Image
Bas Groothedde,
Imagine Programming

I live in a philosophical paradoxal randome filled with enigma's!


Top
 Profile  
Reply with quote  
 Post subject: Re: 5.20 Freeze when a project is opened/closed
PostPosted: Sat Mar 01, 2014 8:30 am 
Offline
User
User
User avatar

Joined: Fri Feb 21, 2014 11:46 am
Posts: 17
I am using Windows 8.1 and PureBasic 5.21 LTS

For quite some time I install programs no longer into ''C:\Program Files' or 'C:\Programme' ) or 'C:\Program Files (x86)' or 'C:\Programme (x86)'.

I always split my hard drive, and then I install programs, where I expect that they often access the Program Directory -
into e.g. 'D:\ProgramFiles(x86)\PureBasic' without any blanks,
so I have then no access problems under Windos 7 and above, and the handover of the program path as a parameter (just without blanks) saves me the one or the other worse.

So I did not have any problems yet with my PureBasic 5.21 LTS

_________________
I may not know much, but I try a lot


Top
 Profile  
Reply with quote  
 Post subject: Re: 5.20 Freeze when a project is opened/closed
PostPosted: Sat Mar 01, 2014 11:55 am 
Offline
Addict
Addict

Joined: Thu Jun 07, 2007 3:25 pm
Posts: 3975
Location: Berlin, Germany
EfDschoma wrote:
I am using Windows 8.1 and PureBasic 5.21 LTS

For quite some time I install programs no longer into ''C:\Program Files' or 'C:\Programme' ) or 'C:\Program Files (x86)' or 'C:\Programme (x86)'.

I always split my hard drive, and then I install programs, where I expect that they often access the Program Directory -
into e.g. 'D:\ProgramFiles(x86)\PureBasic' without any blanks,
so I have then no access problems under Windos 7 and above, and the handover of the program path as a parameter (just without blanks) saves me the one or the other worse.

So I did not have any problems yet with my PureBasic 5.21 LTS

So what?
I installed PB 5.21 LTS in the directory C:\Program Files\PureBasic\ (on Windows 7 x64), and did never encounter any problems.

_________________
Please excuse my flawed English. My native language is PureBasic.
Search
RSBasic's backups


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  

 


Powered by phpBB © 2008 phpBB Group
subSilver+ theme by Canver Software, sponsor Sanal Modifiye